Formula Vauxhall (Opel) Lotus
#1
Posted 23 May 2011 - 09:22
We are thinking of moving from Classic FF2000 to the Monos so any information would be most helpful . Thanks in advance
Advertisement
#2
Posted 23 May 2011 - 09:35
#3
Posted 23 May 2011 - 11:34
Does anyone still manufacture the 'planks' on which they are built? I ask because original ones would surely be in bad condition by now - although as theres no FVL series as such now Im sure you could run some of the 'special' planks certain teams ran, if you can get hold of them.
I understand that the sandwich material is available for when new bottoms are required.
The cars are still run in the Monopost series in the UK but information is sparse .
#4
Posted 23 May 2011 - 11:56
#5
Posted 23 May 2011 - 13:37
It would probably be worth asking the same question "In another place2, ie the Ten-Tenths forum as they have a lot members actively involved in historics.
Yes. I realise that Thanks ,but I felt that with the years of experience found on here I might locate someone who has been active with the FVL cars . Being a mere three score years and ten plus myself , I'm sure that a number of younger TNF people might have had some involvement as it was "only 20 "odd years ago .
#6
Posted 23 May 2011 - 14:35
#7
Posted 23 May 2011 - 15:51
Contact http://www.vit-rts.com/ (Wilco Ibes), they used to supply and ultimately even built the cars.
Thanks for that ! I'd heard speak of "Vit" so now with the contact address ,I'll give them a try
#8
Posted 23 May 2011 - 21:24
Does anyone still manufacture the 'planks' on which they are built? I ask because original ones would surely be in bad condition by now - although as theres no FVL series as such now Im sure you could run some of the 'special' planks certain teams ran, if you can get hold of them.
These cars were designed and constructed by Reynard.
The Panels were made by Technical Resin Bonders.
You might try, Here
Good luck
Charlie
#10
Posted 24 May 2011 - 11:55
I looked after an FVL a while back and the driver has had a few over the years. I may be able to help with specific questions and where to get parts.
Carl
#11
Posted 24 May 2011 - 13:37
Hello
I looked after an FVL a while back and the driver has had a few over the years. I may be able to help with specific questions and where to get parts.
Carl
Thanks Carl , I've sent you email .
#12
Posted 24 May 2011 - 15:28