Jump to content


Photo
* * * - - 3 votes

New engine


  • Please log in to reply
1385 replies to this topic

#901 Wuzak

Wuzak
  • Member

  • 3,579 posts
  • Joined: September 00

Posted 15 March 2012 - 09:26

Will sufficient heat be generated in the exhaust to be used ina combined cycle situation?

Advertisement

#902 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 17 March 2012 - 12:33

Will sufficient heat be generated in the exhaust to be used ina combined cycle situation?


Yes, combined cycle, but also the latest trends ...
http://www.gizmag.co...rove-mpg/10928/

And since it has to work at the coal face powder (same what they use today's power plants for combustion in boilers).
can seals with carbon, similar to the scrubbing of electric motors
http://hariramco.com...on-brushes.html

http://www.dpaonthen...ompressors.aspx

Star engines were characterized biggest always force density

Posted Image

Posted Image


Below picture of the star half rotate around 10 (40) with "cylinders". for the transparency of the picture one can see only 3 additional "cylinders" more than is at the animated film.
One can also see dimensions of the whole of the engine in the assumption that every cylinder has such dimensions for the picture half rotate with the set connecting rod of the Sulzer D= engine of 900 mm and stroke 2500 mm .

Posted Image

So 10 (40) "cylindrical" engine half rotate about the same working capacity in comparing to the Sulzer 10 engine cylindrical on the picture below .

Sulzer: 10 Cylinders 20 m long , 15 m hight , 1500 Ton weight

Half rotate star : 10(40) "Cylinders" 4,5 m diameter , 4,5 m long
about 70 ton weight.

Posted Image

And most importantly.. Since in the engine half rotate mass innertia are several times Sulzer smaller than in the engine, engine half rotate can work with the much greater rotation speed.
Slzer : 102 RPM 60 000 KW

Half rotate 250 RPM 150 000 KW

In same intake work volume .

And now, the efficiency of the engine, due to the friction of the walls of the cylinder to rise about 5%. That is, it is the most efficient machine for the heat, whose efficiency exceeds 50% of the.

http://www.theoildrum.com/node/2249

Regards Andrew :smoking: :smoking:

Edited by Feliks, 17 March 2012 - 12:51.


#903 cheapracer

cheapracer
  • Member

  • 10,388 posts
  • Joined: May 07

Posted 24 March 2012 - 06:33

Guy decided to build his own rotary style engine, bit of reading ...

http://researchbank....6700/Hudson.pdf

#904 gruntguru

gruntguru
  • Member

  • 5,429 posts
  • Joined: January 09

Posted 24 March 2012 - 07:08

And now, the efficiency of the engine, due to the friction of the walls of the cylinder to rise about 5%. That is, it is the most efficient machine for the heat, whose efficiency exceeds 50% of the.

Large marine diesels like the Sulzer have very low piston/cylinder friction due to their crosshead design.

#905 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 30 March 2012 - 01:09

Large marine diesels like the Sulzer have very low piston/cylinder friction due to their crosshead design.


Actually the friction on the cross-head in the engine is small. But, however, is because the piston forward you to the wall of the cylinder. And coal dust there, which causes heavy friction..
In my solution, the piston is pivot on sealed ball bearings and in any as there is no contact with the wall of the cylinder...


Posted Image


Posted Image

regards Andrew :smoking: :smoking:



#906 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 06 April 2012 - 13:40

Posted Image

Andrew :smoking:

#907 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 07 April 2012 - 12:15

You can see how the valve is on the sides, despite the Guide Therefore poped or not evenly sitting and deflects.Which precision is not speech.
Which is the technology that has no possibility of development-convicted on that.So the valves break and flow into the cylinder.Because working in temp. 800 degrees Celsius (or are very white, not red). And the way the power of traditional valves, little changes

http://www.youtube.c...p;v=BBxVPOCrznQ

Happy Easter Andrew :wave:

#908 Tony Matthews

Tony Matthews
  • Member

  • 17,499 posts
  • Joined: September 08

Posted 07 April 2012 - 13:05

You can see how the valve is on the sides, despite the Guide Therefore poped or not evenly sitting and deflects.Which precision is not speech.
Which is the technology that has no possibility of development-convicted on that.So the valves break and flow into the cylinder.Because working in temp. 800 degrees Celsius (or are very white, not red). And the way the power of traditional valves, little changes

http://www.youtube.c...p;v=BBxVPOCrznQ

Happy Easter Andrew :wave:

Happy Easter Andrew to you to! ;)

#909 hogits2

hogits2
  • Member

  • 68 posts
  • Joined: March 10

Posted 07 April 2012 - 13:32

and what about the workers....?

#910 Powersteer

Powersteer
  • Member

  • 2,460 posts
  • Joined: September 00

Posted 15 April 2012 - 03:30

Feliks, I feel that your piston valve might have a problem with exhaust heat expanding the piston while it might need really exotic material..just thinking.

:cool:

#911 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 17 April 2012 - 09:25

Feliks, I feel that your piston valve might have a problem with exhaust heat expanding the piston while it might need really exotic material..just thinking.

:cool:


I think that of course should be mandatory.I am building the second prototype also thought. Although not I expected so much of the heat flow, but knew that this should be given. I think you just aluminium, and not necessarily the exotic materials, however, in the vast majority of uses sufficient to meet his role.

Namely, the design of the exhaust system, is the most important here. And Yes,
piston crowd of the exhaust system must be very thick (no, not even 10 mm (D) piston 40 mm).
Why? And because it must be-tray heat that must be well flow after piston crowd not to generate a local overheating, which cause burning of the piston. Such a relatively thick piston crowd , causes the heat, in particular whether congestion, perfectly located shines around piston crowd and does local overheating which can burn complainant making sure the piston. Can we this thickness piston crowd calmly apply because the piston is working with two times less speed, i.e. the inertia forces are four times smaller, which allows for a much greater mass of the Pistons. Also, the diameter of the piston is small and if it will have a mass, this better aligns it with the mass of the piston of the suction, which is much larger.

In addition to this you can mount the ceramic plate piston crowd, which seriously hamper the flow of heat into the piston.In addition, from the inside of the piston must be made rib cooling, which will increase the area putting heat to the oil cooling piston. The shower spot on this piston crowd from inside the piston is mandatory. And with such a large shower oil, there should not be problems with temperature of piston, bo is the aluminium relatively well to lead the heat. And this is what allows its use, but with the appropriate design of the piston.

Also the design of the pedestrian ring is here important, I in its prototype implements the first ring, the ring of Type L. That is, that its top plane coincides with the plane of the piston ring is made of cast iron, and should not be burning, and protect the upper edge of the piston
:smoking:

Andrew :wave:

#912 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 19 April 2012 - 22:28

http://www.youtube.c...p;v=BBxVPOCrznQ


The pivot valve is there more long after its closure. Usualy you at the end of the compression ratio and probably at the beginning of the work.Must then go out a large part of pressure...

Andrew :smoking:

#913 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 21 May 2012 - 08:58

Fukushima:
"Gundersen: Slowly over the last couple of weeks the hydrogen has continued to build up inside the containments…

It’s coming from the bombardment of water from all the radiation that’s in the core. So a radioactive particle that’s just h20 splits to crank out the hydrogen.

It was incredibly low, now it’s up to about half a percent hydrogen.

So the trend is worrisome.

It has to get to 4% though… before it explodes.

So there’s still a margin to prevent an explosion.

So the trend, why is the hydrogen going up, is worrisome…"



Can hydrogen be requested to give away progressively by using such a method, similar to the disposal of teh hydrogen when charging?

http://bater.home.pl...ation-plug.html

Anything to the atmosphere, you don't need to sit in the application of this method. Everything is in the reactor, and the hydrogen is not…
Nothing to allow passage to the atmosphere.

Andrew :smoking:

Edited by Feliks, 19 June 2012 - 21:16.


#914 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 20 June 2012 - 23:46

http://www.powermag....power-in-japan/

cache http://webcache.goog...r...=clnk&gl=pl

or screen http://www.new4stroke.com/5cents.jpg

Fear think about what would happen, if not given these five cents....

Andrew :rolleyes:

Edited by Feliks, 18 August 2012 - 16:53.


#915 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 23 June 2012 - 20:08

Is it possible Tsunami from the Mainland ???

Yes of course ...

As such, things appear to the local river.....


Posted Image

Wishing you to never be so does not become.

anxious Andrew ):

#916 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 25 June 2012 - 12:03

http://www.mnn.com/g...-buries-highway

http://seattletimes....udslide11m.html



If not yet, unfortunately, there was no Internet....



Andrew :cry:

#917 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 29 June 2012 - 07:46

http://www.guardian....r-reactor-video
17 March 2011

And faith in the power of the defence forces....


Defence force always better than the force of reason...

Andrew :cry:

Whether the IAEA supports still so cooling reactors, or changed the sentence. ??

http://enenews.com/h...-rods-fukushima

Edited by Feliks, 29 June 2012 - 09:21.


#918 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 12 July 2012 - 11:31

http://www.iaea.org/...eport270412.pdf

The new rule :

No Atoms for Peace. Atoms only for War

As teh proved in practice, the spent fuel pools are more dangerous than the same reactors. Probably because of this need not be the same as the reactor containment, ...

Because the fuel in the reactor can be serious, but nonetheless the same fuel in the swimming pool of the spent fuel, no longer is dangerous....

Probably because the spent fuel pools are similar to garden pools :rotfl:

Regards Andrew :smoking: :smoking:

#919 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 12 July 2012 - 22:12

And again the Pyramids ...

Posted Image

And the few words the truth about " swimming pools."

http://everist.org/a...ge_of_Fuku3.htm

Regards Andrew :smoking:

Advertisement

#920 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 12 July 2012 - 23:44


Here's how you can do a little organize with the scrap on 3 reactor.

You need to hire such a tool for cutting of metal from BP, hung it on the lift along with the camera, take the handle of the solenoid.


Posted Image

Posted Image

Also imaginative works underwater he have ... also I have seen them.

Andrew :smoking:

#921 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 14 July 2012 - 10:34


Nice look at the animation:

http://www.javys.sk/...nt-fuel-storage

Andrew :smoking:

#922 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 16 July 2012 - 03:50

Nice look at the animation:

http://www.javys.sk/...nt-fuel-storage

Andrew


And my animation, showing what you can do in 4 Fourth swimming pool in Fukushimie.
You need to build a new building, to the basement of the reactor building to insert with three new reactors, only to store the fuel. They manage any guarantees when possible earthquakes.After filling all the water also will be a guarantee of the & span settlement.

Posted Image


Andrew :smoking: :smoking: :smoking:

#923 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 18 July 2012 - 23:23

Whether engineers will pretend that the atomists still do not know the new inverter UPS Technology on batteries, which in the case of a power failure, it is ready within fractional seconds to the provisioning of the full effect of emergency systems ???
Of course, some diesel then can long function.

But I think, with this reason for savings, because and so nuke is already insanely expensive.

http://www05.abb.com...chure_rev_c.pdf

Andrew :smoking: :smoking:

Edited by Feliks, 18 July 2012 - 23:25.


#924 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 08 August 2012 - 22:57

Monument to the victims of the earthquake in its epicentre in Tashkent. You can see clearly the huge cavity, in which the trees are growing, and despite their vertices do not protrude above the ground of the monument, the cavity is approx. 50 m depth.
And talk to someone it does not appear that build the atomic power stations on earthquake-resistant, ...Jan Christian Andersen Fairy Tales. ...
I have seen. I recommend a trip atomist engineers in particular.

Posted Image


Andrew :smoking: :smoking:

#925 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 15 August 2012 - 23:41

This is now seriously with these atomists...
And I am evaluating, so most of my friends of cancer in various forms leaves prematurely.And here you have a surprise
Something that, after these liar nuke not I expected!

http://ex-skf.blogsp...h-220-bqkg.html

Andrew :cry:

#926 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 18 August 2012 - 01:52

In order to provide the reactors in Fukushime from the bottom you have the mechanical tunnel.
Then insert the two meters in diameter with 20 tubes. , Do the holes from the top and side, and on the bottom line fire resistant ZrO2. For large pipes enter the small tube to remove radioactive leaks or cooling corium had reached there...


http://www.herrenkne...GB_09-12-21.pdf

http://www.herrenkne...GB_08-10-29.pdf


Posted Image

Certainly not the cheapest, but it will give guarantees that the radioactive materials do not enter the land and ocean

Regards Andrew :smoking: :smoking:

#927 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 05 September 2012 - 00:30

Can to remove scrap metal from the reactor 3 can use these electromagnetic grippers?
Also for attaching various devices and cameras probably would be useful..
Posted Image

Posted Image

Andrew :smoking:

#928 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 24 September 2012 - 00:02


Whether, if the sprayer to the treadmill, for example, a car, it will be more supportive of animals?


http://en.wikipedia....wiki/Horse_mill

Posted Image

Andrew :rolleyes:

#929 MatsNorway

MatsNorway
  • Member

  • 2,083 posts
  • Joined: December 09

Posted 24 September 2012 - 14:06

How does magnets react to radiation?



#930 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 27 September 2012 - 01:25

I wonder if to ask if these two smiling at us men to graciously evacuated their asses out of this car, it would be possible instead of carriage them to produce some electricity for us? Since drivers are not needed, because the car is harnessed to the treadmill and drivin in circles .. But one thing is certain, that such a vehicle driving the external energy, we will have the wind, regardless of the weather ... AJ is here the energy produced is sufficient to maintain the treadmill speed, it will be good .... And maybe even a few kilowatts for us is for our use ....
And it is always, regardless of the weather ... I do not need to go to the desert to breaking records. This can be done on the treadmill near the house...



http://news.discover...ork-111207.html

Posted Image


Posted Image


Andrew :smoking: :smoking:

#931 Kelpiecross

Kelpiecross
  • Member

  • 932 posts
  • Joined: October 10

Posted 27 September 2012 - 05:19

I wonder if to ask if these two smiling at us men to graciously evacuated their asses out of this car, it would be possible instead of carriage them to produce some electricity for us? Since drivers are not needed, because the car is harnessed to the treadmill and drivin in circles .. But one thing is certain, that such a vehicle driving the external energy, we will have the wind, regardless of the weather ... AJ is here the energy produced is sufficient to maintain the treadmill speed, it will be good .... And maybe even a few kilowatts for us is for our use ....
And it is always, regardless of the weather ... I do not need to go to the desert to breaking records. This can be done on the treadmill near the house...



http://news.discover...ork-111207.html

Posted Image


Posted Image


Andrew :smoking: :smoking:


Just what is this thread about?


#932 gruntguru

gruntguru
  • Member

  • 5,429 posts
  • Joined: January 09

Posted 27 September 2012 - 07:52

I suggest you read it carefully from the start. You should come to the conclusion it is not about anything in particular, rather it is about everything in general (with an emphasis on all things eccentric).

#933 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 27 September 2012 - 10:14


Finally, heavy equipment, the 21st century as far as technology began to be used ..


Posted Image

http://www.youtube.c...player_embedded


Andrew :smoking:

#934 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 27 September 2012 - 13:27

http://www.rcgroups....chmentid=777461

Of course, the fuel will be coal dust....

Andrew: Wavey

Originally posted by Anth
Of course



I hope you will also agree with this, teeth were the least moving parts. The 5 MW windmill should be placed. Mounted on the ends of the arms jet frame. (ends reach such a large fan wheel 1 Ma), so the jet frame will fit well ... It will be a "small" treadmill

Posted Image

http://en.wikipedia.org/wiki/Ramjet


Andrew :smoking: :smoking:

Edited by Feliks, 27 September 2012 - 13:28.


#935 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 07 October 2012 - 00:46

Ramjet symulation (upper green) Need Java
http://www.grc.nasa....ane/ngnsim.html


As I see massive construction that are to demolish the building of Reactor No. 3 is me shivers go ..
Certainly the building suffered the most, because it was the biggest explosion. So the walls are certainly very weak, and it seems to me that the water in the pool of fuel remains a miracle there is to do there can not be inspected, that does not mean that the building is sturdy ..
Therefore, demolition should in my opinion not cause additional shocks, and be carried out as gently as possible ... Heavy construction equipment, rather they should not be used ...
They are after all modern methods, such as cutting concrete with water. The company offers cutting up to 3 meters ..

http://ajaks.eu/en/s...mic-robots.html

I do not want to think what would have happened, if as a result of the vibrations, the resulting leaks in the fuel pool and the water came out of it ... Almost as a result of radiation inside the building and its three filling remains, you can not to re-seal it. ..

Therefore, even mild disturbances such methods may be used: diamond cut rope ..

http://www.hilti.com.....leaflet e.pdf

https://www.hilti.co.....S-WS10 en.pdf



http://www.youtube.c...p;v=N54madabs9s

http://www.youtube.c...p;v=GVI8Z5grdOw

http://www.youtube.c...p;v=I8xoHvhiA2k

Andrew :smoking: :smoking:

#936 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 09 October 2012 - 13:48

Posted Image

Andrew :smoking: :smoking:

#937 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 23 October 2012 - 21:43

Here, the photo of the engine and Abart, for those who have doubts about the hight engine of my..

Posted Image

Andrew :smoking: :smoking:

#938 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 01 November 2012 - 09:21

Did you know that it looks like the latest engine to produce electricity using any fuel, such as coal dust. Attached to the treadmill, skip step steam,,,
The end of the treadmill must be about 1 Mach speed, which at the shoulder of 50 meters is normal ... every second ..

Posted Image


http://www.youtube.c...p;v=CGcRgEuCocQ

It's not like we all have to fly, but the current a good thing ...


Regards Andrew :smoking: :smoking:

#939 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 05 November 2012 - 13:57

Here is a reworked so as not to put unnecessary drag .. A bit like a UFO. Still on the edge of the "plate" can fasten some neodymium magnets ....

Posted Image


With these dimensions of 10 MW ....

In preparation for the new job of atomic physics, they can calculate the efficiency of the this power plant ...

Regards Andrew :smoking: :smoking:

Advertisement

#940 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 19 November 2012 - 13:10

As you remember I really like windmills operating in the negative pressure .....
Here you have one type of renewable energy that can run on the negative pressure generated by the moving cars ...

http://www.new4stroke.com/cars.wmv

Andrew :smoking: :smoking:

#941 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 22 November 2012 - 02:49

This treadmill UFO version of ramjet engines, would work best as an MHD generator. Its efficiency apparently comes to 60% or more has no moving parts. At 1 Mach plasma jet should be good.
The rest of you can generate in the traditional way, which would help stabilize the rotation ...

Posted Image


Posted Image

Posted Image

Andrew :smoking: :smoking:

#942 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 29 November 2012 - 01:17

This model can be mounted on the ends of the arms windmill ....


http://www.youtube.c...p;v=s7c3zz0rWZM

Andrew :smoking: :smoking:

Maybe the exhaust manifold to the F1 wear a magnet and additional energy (electricity) have?

Edited by Feliks, 29 November 2012 - 02:25.


#943 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 10 December 2012 - 02:05

Hi-Fi Wind Amplifier...

Posted Image

Regards

Santa Claus :smoking: :smoking:

#944 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 12 December 2012 - 22:55

A song about Christmas Eve from Santa Claus :

http://www.youtube.c...p;v=sMCZ4mjnLqs

:love:

#945 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 13 December 2012 - 19:33

So interesting what you can find in your archives. The oldest Radioamator I found in my ...

Posted Image

Google translated :
"According to information published in one of the writings of English - has been developed by researchers at the concept of electricity generation by passage of ions and electrons with very high speed through a magnetic field
The practical implementation of this method that was based on Plasma gas forcing by the strong magnetic field. Electrical power of 1000 KW can be obtained by passing the said plasma at 3 times the speed of sound, the magnetic field of 1 meter long between the poles of a magnet at a distance from each other by about 15 cm. No, you would need the boilers and steam turbines. Previous experiments have generated so far a small amount of electrical energy. Achieving the full effect expected after several years of further intensive tests conducted"..


Andrew :smoking: :smoking:

#946 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 13 December 2012 - 22:58

Do not give me those numbers alone ... When linearly decreased as the amount of energy ... it
5 cm in diameter and 1 meter length of pipe that is 10 times less that is = 100 KW
The flow rate is not 900 m / s just say 200 m / s that is to say 4, 5 fold less = 22KW ... For each cylinder?

Andrew :confused: :confused: ????

#947 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 16 December 2012 - 15:25

How can I bypass the statutory 20 mm in diameter ... and have a little more air in the engine intake manifold

http://sae.wsu.edu/m...08car/08-03-10/

Posted Image


And here, if the exhaust pipe wrap neodymium magnets .... I have a small MHD...

http://sae.wsu.edu/m...ne/target0.html

Posted Image


Andrew :smoking: :smoking:

Edited by Feliks, 16 December 2012 - 15:34.


#948 Feliks

Feliks
  • Member

  • 642 posts
  • Joined: December 04

Posted 30 December 2012 - 16:04

Some experience with Plasma. In the film, the plasma is formed, even when the current is flowing in the nano-amperes...



And here is video showing that you can do in addition to current, lovely music, which instead of ordinary hum, will be extracted out muffler...



http://www.youtube.c...ature=endscreen




Even serious business, what comes out of mufler treat seriously"
" Designing any exhaust system today is a challenge – especially when it is for an iconic sports car with a famous sound signature. Ricardo’s WAVE software was used by Porsche engineers in the development of the latest 911 model"

Regards Andrew and sends best wishes for New Year. :wave:


My private hand made plasma for cut 100 A

Posted Image

Cutting Torch :
http://www.google.pl...355534169,d.d2k

Edited by Feliks, 30 December 2012 - 23:11.


#949 Tony Matthews

Tony Matthews
  • Member

  • 17,499 posts
  • Joined: September 08

Posted 30 December 2012 - 19:06

Happy New Year, Andrew.

#950 malbear

malbear
  • Member

  • 243 posts
  • Joined: September 02

Posted 31 December 2012 - 06:18

Happy New Year, Andrew.

thank you for your contributions and have a Happy New Year, Andrew :cat: :lol: