Hey could anyone here help how I can play rfactor with xbox360 gamepad! I would really appricate it if someone could help me how to do that THANKS ALOT!
Rfactor Help!
Started by
Hypnotise
, Oct 22 2009 14:38
3 replies to this topic
#1
Posted 22 October 2009 - 14:38
Advertisement
#2
Posted 23 October 2009 - 00:34
I assume this is simple. Check that your controller is working in Windows (-->Control Panel -->Game Controllers etc), then start rF, then in rF options you have the ability to set which axis / buttons are used for steering / shifting etc. There may already be a default for a gamepad, I know there is a default "AZ Keyboard" that I can select and load when I am skinning and want to check a car on-track without getting my wheel out.
#3
Posted 23 October 2009 - 20:50
This is only for the wired controller, I believe an adapter is needed for the wireless but I'm not certain.
Assuming you haven't already done so download the software for using the 360 controller on the pc from here (just select it in drop down boxes)
http://www.microsoft...p;sku=JR9-00001
once installed you should be able to connect the controller and the pc should recognise it.
start rFactor and then following.... customize.....settings......controls......mapping
you can then assign each button/axis to whatever you choose
That should be all you need to do
Assuming you haven't already done so download the software for using the 360 controller on the pc from here (just select it in drop down boxes)
http://www.microsoft...p;sku=JR9-00001
once installed you should be able to connect the controller and the pc should recognise it.
start rFactor and then following.... customize.....settings......controls......mapping
you can then assign each button/axis to whatever you choose
That should be all you need to do
#4
Posted 23 October 2009 - 21:43
ty mate