BRM Type 25
#1
Posted 09 November 2000 - 01:53
An unusual aspect of the BRM design was that there was only a single rear disc brake, which worked off the end of the rear-mounted transmission. Unorthodox and clever, it was also a point of concern, having not been very good at its job over time.
I belive this disc can be nicely seen on this photo (whilst at it, my uneducated guess would be that the other driver is McLaren- 8W players take the stand).
That braking method has crossed my mind before (of course, I was totaly unaware that such thing did exist, which proves my ingenuinity and brilliance [Applause. Cheers from the audience.]). Needless to say, I was almost tarred and feathered for having such preposterous ideas:). Well, I myself had some doubts on that matter and I would like to share them with you. In my opinion P25 had to be basically oversteering car- can anyone prove me right or wrong?
Here's why I assumed it- single brake must have been mounted before the differential in order to brake on both wheels. And in that case braking force was distributed on the wheels as is driving force- better braking on inner wheel (for it revolves more slowly). This manner of braking induces understeering. So, if P25 was already understeering car, this feature would seriously impair it's performances. The other issue is if car is oversteering, in which case braking in the curve induces drift. Am I right?
The issue that I almost got flogged about is that I was speaking of installing such thing in normal car. And there's a fine difference because people usually brake in the corners when things start to get out of hand. And this brake would make the things even worse.
Advertisement
#2
Posted 09 November 2000 - 02:58
The BRM 3 brake system lasted from 1955 to 1960 (in the rear-engined cars). Those were not the days of sponsorship, and building new components for each season was not on.
The brake system caused lots of problems, and possibly lost BRM two championship races, Behra at Monaco in '58, and Graham Hill in his famous drive from last to first at Silverstone in '60. Behra ran out of brakes, and Monaco was the last place you wanted to do that before the days of armco. Hill was having to pump his brakes with a very determined Brabham in his mirrors, having overhauled the whole field. Passing Brabham was could be one thing, getting away from him another. Anyway, Graham left the pumping a bit too late and ended in the ditch at Copse, spoiling what would have been a classic drive.
Back to Goodwood in 1957 (oh no, not again you say!), the brakes were locking on and not releasing during practice! The BRM team was a total shambles. Salvadori (no.1 driver)got so pee-ed off, he went off to find somebody's Cooper to drive during the session. "Where's Salvadori?" asks Raymond Mays. "On the track," was the reply, "In a Cooper."
And then Behra had to use the wall at the Goodwood chicane to stop himself in 1958 after a total brake failure going into Woodcote. Left him wondering how fast he could take Woodcote under control!
The P25 looked very stable on the track, with a mild understeer. By all accounts, a nice car to drive.
And, oh yes, that man, SM lost all his brakes in the International Trophy at Silverstone in 1959 whilst in a works P25. Remember a lovely picture of him in MS preparing to make a crash landing in a ditch.
#3
Posted 09 November 2000 - 08:27
Of course, it's anyone's guess what the locking on was...
A picture of the rear of the rear engined car shows it much better, and I think there's one been used somewhere on the forum.
#4
Posted 09 November 2000 - 08:31
The hat's too dark for McLaren, who had a silver one those days, like Jack. None of this is conclusive, though, and Moss' story is hardly a complete report. But I'll plump for Gregory.
#5
Posted 09 November 2000 - 10:04
Graham Hill with his car at Monza.
Rainer
#6
Posted 09 November 2000 - 11:02
Centering around Bonnier's classic Zandvoort win (that's Brabham in Wolf's picture, BTW) my friend Felix wrote a nice story on BRM's poor early form. You can find it in the October '99 issue of 8W:
http://www.racer.dem...8w/8w-1099.html
Read it and you'll notice that those brakes just kept on harrying Messrs Mays and Berthon!
#7
Posted 09 November 2000 - 20:15
#8
Posted 09 November 2000 - 20:16
#9
Posted 09 November 2000 - 20:19
Can't have been too bad, neither of them went off the road at Warwick Farm, and you needed brakes there. The just melted the glue in their fuel tanks with the heat, I think it was... strange reason for a team to go out.. but then the history of racing is dotted with many strange reasons.
#10
Posted 09 November 2000 - 22:31
"On the 10th lap the special aircraft pipe to Dan's rear brake burst as he was going in to the hairpin at the end of the main straight."
This account matches up with Roger Clark's observation (above) that most of the BRM brake problems were due to the servo and associated hydraulics.
#11
Posted 09 November 2000 - 23:43
BTW, I'm going to take that offer on 'Design & Behaviour ...', maybe there will be something in there.
#12
Posted 10 November 2000 - 00:03
As for the heat, it was all hydraulics, the problems, but you may be right, maybe some vapourisation.
#13
Posted 10 November 2000 - 01:32
#14
Posted 10 November 2000 - 02:35
#15
Posted 10 November 2000 - 02:51
#16
Posted 10 November 2000 - 03:57
Roger, the Mays and Roberts book reports the servo system being removed after the 1958 Goodwood meeting. Whereas it caused Behra to lose his brakes, it caused a locking problem with Schell's. The litany of brake problems still continued though.
I've always wondered if the one brake doing the work of two imposed stresses on the hydraulic system that BRM could not manage. Problems never seemed to go away.
Did the drivers have to nurse the brakes?
#17
Posted 10 November 2000 - 07:00
#18
Posted 10 November 2000 - 19:38
#19
Posted 10 November 2000 - 20:10
Advertisement
#20
Posted 11 November 2000 - 07:52
The '58 car was radically different from the original concept, looking, and presumably being, bulkier, though my sources don't give any comparative data for weights.
#21
Posted 12 November 2000 - 01:17
The argument given above that they couldn;t replace components each season has validity, but to keep this abomination for 6 years, essentially unchanged, was economy gome mad. When Rudd took charge for 61, it went. One can only presume that the idea was retained on the basis of reduced unsprung weight. The fact of the matter is that the theoretical advantages were outweighed (in most peoples minds (particularly the drivers)) by hte unreliability it introduced.
With regard to handling, it is probably safe to assume that the later P25 was designed to understeer as a basic feature. It was designed by Chapman while he was still under the influence of the standard thinking introduced by the MB engineers in the late thirties - basic understeer for stability, with power induced oversteer creating the 4 wheel drift. h Chapman persisted with this in all of the designs he was involved in (P25, Vanwall, Lotus 16) until it became clear that with the power outputs then available (250 hp cf 500+ for the MB 154) the understeer sapped too much power. this was ably demonstrated by Cooper, and once Chapman overcame his revulsion of "copying), the Lotus 18 proved the fastest car on the grid.
#22
Posted 12 November 2000 - 02:15
Mays reported that Behra had quite a hand in making recommendations for the front end. I get the impression that BRM were having to chase some major chassis design short-comings in the '56 car, rather than pursuing a design intent. 'Make it driveable' seemed to be the quest, and they succeeded.
#23
Posted 13 November 2000 - 06:06
#24
Posted 14 November 2000 - 03:58
I want to thank Felix for e-mailing me copies of his, and Don's, articles on the BRMs. He that rules most things in the computer world had decreed that I cannot access the Demon-racer's link, and Felix responded very quickly to my request. Linking to another thread, it goes to show, again, what a fine thing you have started Don, and what a great bunch of people support this forum.
One of the things that struck me about this thread was the difficulty some people were having relating to why BRM stuck with a braking system that caused so much trouble, and why they contradicted the early chassis design principles of the car.
Some of the reasons are hard to understand from a current viewpoint of F1 racing, when new chassis' are built every year. The '50's were not the times of the big spenders, and even Tony Vandervell used major components from the earlier cars when Chapman designed a new chassis for the 1956 season.
I am not a F1 historian, but trying to look at 1950's cars from the 21st century is not easy, and the record books and specification tables don't capture the whole story.
Now I have not been a good historian (sorry !)in examining all my sources re the chassis/brake issues before making posts. They are DSJ's Racing Car Reviews for 1956,'57, and '58, the Mays and Roberts' book.
The chronology they show is:
1955: Short chassis (7ft 3in. wheelbase), air struts front & rear
mid-1956: chassis lengthened by 3in
Sept.1956: Double stressed skin applied around cockpit area, air struts at rear replaced by leaf spring.
1957,mid-season: coil spring units used front & rear, rear chassis redesigned.
1958: new chassis, stressed skin structure eliminated. Servo removed from braking system after Goodwood meeting.
Now all this says to me that the original chassis, as well as the suspension and braking system, were pretty deficient when compared to the opposition, and the chaps in their tweed jackets were pretty slow in coming to terms with the problems.
The original engine was another matter, as anyone witnessing Hawthorn jack rabbit away from all the opposition at Silverstone in 1956 could testify. The engine was designed to run at 9000rpm, but at Monaco in 1956, they discovered that large valves were being distorted by temperature gradients. Redesign was necessary, and it took 2 years to get maximum revs up to 8,250rpm on Avgas.
The thought occurs to me that had BRM ever found a way to get back to the 9,000rpm limit by 1958, the opposition would have been puffing hard to keep up with them. Had they discovered the cooling problem which was identified in 1960, would they have had the valve distortion problem? Or was it poor head-design problem?
Another "What if"?
The original design was labelled as relatively simple, but I'm not sure a 4 cylinder engine revving at 9,000rpm wasn't over-ambitious for those days. The 4 cylinder Vanwall had a limit of 7,400rpm on alcohol fuel. Both were subject to bad vibration problems, but Vanwall did a much better job at managing theirs.
Felix talks of being mystified by Peter Berthon's design decisions, and I think the same could be said of Tressillian's approach to the engine. It all looks like the P15 again, without the noise (PR and engine).
How does the historian capture the bad management factor? It is self-evident looking at the records, but how do you convey a sense of it?
A walk around the paddock in those days could capture some of the sense. So here is one.
Practice at Goodwood in 1957 (groan,groan). Mid-session, the cars are in the pits needing attention to the brakes. Salvadori, no.1 driver, is amusing himself driving a Cooper. Work is finished, with chaps in tweed coats in close attendance. One of chaps in a tweed coat fastens the bonnet clips (English car). Chief mechanic observes. Remember, in '56, a bonnet came off in testing and nearly collected Hawthorn's head.
Mays then inquires about Salvadori's whereabouts. "On the track," is the reply, "In a Cooper."
Mays, with a certain amount of huffiness, "Then call him in."
Everything I'd read about BRM up to then fell into place.
Another part of that history that is now hard to relate to is the nationalism that was part of the sport for that period in the '50's. We fans were just longing to see the green cars beat the red. The roar that went up when Hawthorn in the BRM pulled out to rocket past Fangio at the International Trophy Meeting could be heard on the other side of the Silverstone circuit.
Equally, Italians wanted to see their beloved red rule the day, and they did not give up easily. It was just a different dimension to the racing of that time, and it drove the chaps in tweed coats as well as the autocratic Tony Vandervell.
#26
Posted 03 July 2024 - 11:42
... "Probably his most famous racing feat was at Avus in 1959 when he abandoned the apple-green British Racing Partnership front-engined BRM in mid-air after the brakes failed. The photographs of this hectic shunt still make the magazines from time to time as one of the best in racing shots. Racing car collector Tom Wheatcroft is having a new chassis for this car built at BRM over the winter and he will rebuild it using all the original bits. Apparently Ken Gregory collected all that remained of the BRM and put it in the trunk of his car to take it back to England!"
#27
Posted 03 July 2024 - 13:37
The well known photograph of Hans Hermann's shunt with the BRM at Avus was taken by Julius Weitmann but he is rarely mentioned as the photographer. What makes it such a good image is the way Hermann is looking back at his still in flight car as though it was nothing to get excited about.
#28
Posted 03 July 2024 - 20:08
The well known photograph of Hans Hermann's shunt with the BRM at Avus was taken by Julius Weitmann but he is rarely mentioned as the photographer. What makes it such a good image is the way Hermann is looking back at his still in flight car as though it was nothing to get excited about.
I once read an interview of Hermann where he was asked how he could have done that. His answer was to the effect he was barrel rolling and the timing of the picture was just right.
#29
Posted 03 July 2024 - 20:44
The well known photograph of Hans Hermann's shunt with the BRM at Avus was taken by Julius Weitmann but he is rarely mentioned as the photographer. What makes it such a good image is the way Hermann is looking back at his still in flight car as though it was nothing to get excited about.
I have seen several very similar photos. I suspect there were several photographers there who captured slightly different stages in the accident. Remember this was before the Nikon 'F' with motor drive
#30
Posted 04 July 2024 - 04:34
ORO took one Type 25 to New Zealand for their summer internationals in 1959. Away from home so I can't help with the chassis number.
Ron Flockhart was up against the 2/2.2-litre Cooper T45s of Moss, McLaren and Brabham and a swag of Maserati 250Fs, he did very well. He started from pole at all three events they contested: Ardmore (NZGP), the Lady Wigram Trophy and Teretonga International and had a DNF oil leak, a win and second place respectively.
The shots are all at Wigram: photo credits - John Manhire above, Kelvin Brown below
Classic Auto News - Allan Dick
No idea of the formal event - lookout ladies - perhaps one of our Kiwi friends can advise? Ron above with an XK150 FHC. Photo Bert Govan
ORO returned Down Under in 1961, this time fielding a pair of P48s for Graham Hill and Dan Gurney in NZ and Australia.
The shot below shows Hill's car in Auckland in the lead up to the NZGP, still wearing the #17 he carried at Riverside during the November 1960 USGP.
Edited by MarkBisset, 04 July 2024 - 04:57.
#31
Posted 04 July 2024 - 09:47
ORO took one Type 25 to New Zealand for their summer internationals in 1959. Away from home so I can't help with the chassis number.
Ron Flockhart was up against the 2/2.2-litre Cooper T45s of Moss, McLaren and Brabham and a swag of Maserati 250Fs, he did very well. He started from pole at all three events they contested: Ardmore (NZGP), the Lady Wigram Trophy and Teretonga International and had a DNF oil leak, a win and second place respectively.
The shots are all at Wigram: photo credits - John Manhire above, Kelvin Brown below
Classic Auto News - Allan Dick
No idea of the formal event - lookout ladies - perhaps one of our Kiwi friends can advise? Ron above with an XK150 FHC. Photo Bert Govan
ORO returned Down Under in 1961, this time fielding a pair of P48s for Graham Hill and Dan Gurney in NZ and Australia.
The shot below shows Hill's car in Auckland in the lead up to the NZGP, still wearing the #17 he carried at Riverside during the November 1960 USGP.
acer v5 keyboard not working
Mark, the NZ P25 was ch no 259.
#32
Posted 04 July 2024 - 09:53
They should have sent the P25 to Australia, Arnold would have bought it.
#33
Posted 04 July 2024 - 14:44
Mark, the NZ P25 was ch no 259.
I did, and still have my memberhip card...
#34
Posted 05 July 2024 - 04:08
For interest, here are a couple of BRM P25's currently for sale:
Racecarsdirect.com - BRM Type 25 Formula 1
Racecarsdirect.com - 1959 BRM P25 #2510
#35
Posted 05 July 2024 - 08:29
One question for our BRM specialists (and after having checked the various threads on the right kind of BRM lust 'green'), what do you think about Spark's reproductions of the P25? Even considering that oxidization turned the paint darker, I can't believe the green Spark have selected is the right one? It looks too light and too much shiny to my eyes, almost like Aston's GP racers.
Apart from that 'small' detail, the models are spot-on, which makes it a shame they could not get the paint right.
One example: https://www.carmodel...-j-behra/160995
#36
Posted 05 July 2024 - 11:11
Presumably that's the Robs Lamplough car?For interest, here are a couple of BRM P25's currently for sale:
Racecarsdirect.com - BRM Type 25 Formula 1
#37
Posted 05 July 2024 - 12:55
...I can't believe the green Spark have selected is the right one? It looks too light and too much shiny to my eyes...
To my eyes too, but I think it's almost impossible to produce a convincing metallic colour on a small model. The metal flakes in the paint are "full size" not 1/43rd. My personal prejudice would say, paint it in a shade of green that looks about right, but forget the metallic "lustre".
Edited by Sterzo, 05 July 2024 - 12:56.
#38
Posted 06 July 2024 - 01:47
Thursday, 22 October 1981 and the BRM collection was being split up at Earls Court Motorfair in an auction run by Christies.
Here's the Type 25 Dutch GP-winning car's 4 pages from the catalogue.
includes this brilliant Tom March colour photo of Harry Schell in action
Stephen
#39
Posted 06 July 2024 - 11:04
I did, and still have my memberhip card...
... aside from the membership card were any other interesting 'particulars' forthcoming ?
#41
Posted 07 July 2024 - 18:14
To my undying shame I wrote that BRM description for Christie's way back when. That's right, I described the car as a P25 when - as evry skuleboy (should) no, the engine was the P25, the chassis was the P27 and the union of both is better-described as the Type 25.
The foolishness of (relative) youth - I was only 35 (ish)...
DCN
#42
Posted 08 July 2024 - 03:50
Thanks to Tim or Richard for tweaking the thread title. When I did the advanced search the other day, looking for an appropriate existing thread, 3 or 4 came up under BRM P25, but just 1 as BRM Type 25. However it was this one that had the most previous posts.
3/9/55 Aintree (P) BARC Daily Telegraph International race meeting
Rubery, Owen advert p8
Paddock Jottings – A new BRM - BRM type 25 info/ photo p19
Event 3 The Aintree ‘Daily Telegraph’Trophy Race 17 laps 2.05pm p27
9 A G B Owen Dvr P Collins BRM 4 2491 Green – crossed out
Event 5 Formula Libre Race 17 laps 4.40pm p31
22 A G B Owen Dvr P Collins BRM s/c 16 1487 Green
This is the writeup from the September 1955 Aintree programme where there was an attempted race debut for the 4 cylinder car. As far as I'm aware a broken oilline and minor accident thwarted that.
Stephen
#43
Posted 08 July 2024 - 15:07
Reading through this thread makes the point that BRM tended to fail when they pursued uncommon or complex solutions....V16, single rear brake, H16, too many cars instead of concentration of resources. And succeeded when they focused on refining basic solutions....sublime 1.5L V8, V12 cars c1970-71.
Regarding the rear brake, was it abandoned following Gurney's accident and subsequent driver's revolt that resulted in Tony Rudd being appointed as overall director of the GP program ?
#44
Posted 08 July 2024 - 15:59
The rear-engined P48 had more weight on the rear wheels and thus more braking capacity at the rear wheels was needed. The single-disc concept could no longer cope and was replaced during 1960 by the more conventional twin-brake setup.
#45
Posted 09 July 2024 - 16:43
As Tim says...
DCN
#48
Posted 12 July 2024 - 09:33
Mark, looks to be lifted from the photo appearing in the Aintree programme shown several posts back. Shadows and angles suggest so.
Stephen
#49
Posted 12 July 2024 - 21:44
Mark, looks to be lifted from the photo appearing in the Aintree programme shown several posts back. Shadows and angles suggest so.
Stephen
Looking at the dates, I would suggest a common source, rather than one being lifted from the other.
#50
Posted 12 July 2024 - 22:50
Time to re-read Doug's chapter(s) on these wonderful cars and evolution to pointy-end-dweller!
The only time I saw one driven in anger was at Phillip Island on the Spencer Flack Weekend, how marvellous it was. I don't recall if I competed that weekend, but whatever the case I'm thankful I didn't see the accident. What an awful weekend it became.
m