Thanks Peter, I also re-read MotorSport and found that D.S.J. had already done the research!! Love the bit about it finding its way into Doc Merfield's mad Cortina, it helps with the Special Saloon research we are doing too! Thank you.
Coventry Climax FWMV V8 engines; fascinating facts
#51
Posted 10 February 2015 - 12:09
Advertisement
#52
Posted 10 February 2015 - 12:23
Wouldn't it be great to see the Cortina FPE back in action - preferably road registered where it would make a highly amusing Q car...
#53
Posted 10 February 2015 - 12:37
Oh yes. Though quite a few of us would love to see it at a CSCC Special Saloon meet :-) B.T.W. do you happen to know which edition of Motor Racing contained the track test, I'll look out for it at Race Retro.
#54
Posted 10 February 2015 - 15:19
Oh yes. Though quite a few of us would love to see it at a CSCC Special Saloon meet :-) B.T.W. do you happen to know which edition of Motor Racing contained the track test, I'll look out for it at Race Retro.
October 1966
#55
Posted 10 February 2015 - 15:30
I think it's also reprinted in the Motor Racing end of year annual.
#56
Posted 02 September 2025 - 10:25
The FWMV used two types of Weber carburettor in 1961 and 62. The early engines used IDMs, but they changed during 62 to the DCNL4. The IDM was superior but out of production and so in very short supply.
I believe it is possible to distinguish between them because the IDMs were mounted longitudinally and the DCNL4s transversally. Does anybody know:
(1) whether this is a reliable way of telling which carburettor an engine has;
(2) whether the change in orientation was due to some characteristic of the carburettor or to a change of philosophy by Climax;
(3) when the DCNL4s began to be used?
I asked this question many years ago and didn't get an answer though I should have written IDF, not IDM. Since then I have learned a little more:
(1) DSJ said that the Lotus 24 had IDFs on its first appearance in Brussels.
(2) The first appearance of the transverse mounting was at the Dutch Grand Prix. DSJ said that the Lotus 25s, the 24s of Brabham and Ireland and the Cooper all had them. He didn't attend all the early non-championship races so it is possible, if unlikely, that they were used for then.
(3) FWMVs suffered from hesitation when accelerating on part throttle throughout 1962. It was only cured when they switched to fuel injection. Wally Hassan said in a paper to the American SAE that this was due to the transverse mounting of the DCNL4s.
(4) Des Hammill, in his book on Climax engines says that teams were constantly looking for IDFs throughout 1962, Reg Parnell particularly so. Hammill tells a lovely story of Parnell sending a mechanic to Italy to fetch a set he had located. The only was the mechanic could get back in time was by travelling first class. He made great use of the complementary hospitality and was in such a state by the time he got back to London that he completely forget to take the precious carburettors off the plane.
This doesn't answer any of the questions I asked in 2012. It also raises the question of why, if IDFs were superior and were used early in the season, didn't teams just continue with them. It is possible that the carburettors belonged to Climax and they didn't want any of their customers to have an unfair advantage.
I would be very grateful for any thoughts, additions or corrections.
#57
Posted 04 September 2025 - 08:20
October 1966
A scan/ copy of this track test would be most welcome from an active point of view.
Roger Lund
#58
Posted 08 September 2025 - 07:11
Roger, did you receive my email?
#59
Posted 08 September 2025 - 08:10
Yes, many thanks. Apologies for not replying sooner, busy day away yesterday. It makes interesting reading, especially in the light of conversations with JC-J over the years and the man who did the machining for the liners.
Roger









