Jump to content


Photo
- - - - -

Siamesed Inlet Ports


  • Please log in to reply
9 replies to this topic

#1 Sterzo

Sterzo
  • Member

  • 7,890 posts
  • Joined: September 11

Posted 23 August 2025 - 12:23

This may be a very short thread, as it is simply a technical ignoramus (me) asking for an explanation of the value of siamesed inlet ports. It's prompted by John Starkey's excellent book, 'Ferrari, The Monopostos of 1948-1952'. On page 12 he tells us that the Tipo 125 V12 racing engine, developed in 1946, had siamesed ports 'so that one carburettor choke could feed two cylinders'.

 

My question: is that the sole or main benefit? Perhaps multiple carbs are less reliable as they can go out of sync. I have read elsewhere that siamesed ports can reduce the cost of production engines, which shouldn't be a factor here. Presumably there's a small weight saving. Is there any benefit to gas flow, by setting up pulses in the shared port?

 

 



Advertisement

#2 10kDA

10kDA
  • Member

  • 1,895 posts
  • Joined: July 09

Posted 23 August 2025 - 15:15

Maybe that's the benefit - one potentially finicky carb or throat adjustment per two cylinders. Didn't Colin Chapman sell a modded intake manifold with vanes/splitters that extended into the intake ports of some popular production engine, thereby more or less un-siamesing the ports and improving performance?



#3 Michael Ferner

Michael Ferner
  • Member

  • 7,559 posts
  • Joined: November 09

Posted 23 August 2025 - 18:21

The way I understand it, the benefits of siamesed ports are simplicity, packaging and costs. Gas flow suffers, on the other hand, because cylinders 'rob' each other of intake and disturb the resonance in the exhaust. In other words, it's a sacrifice. And yes, Chapman fitting vanes/splitters to un-siamese/de-siamese a port rings a bell.



#4 Sterzo

Sterzo
  • Member

  • 7,890 posts
  • Joined: September 11

Posted 23 August 2025 - 19:22

Indeed, I also recall splitters added to siamesed ports for racing, might have been in F3 in the seventies. And I thought that siamesed ports were a compromise for simplicity in road car engines, hence my surprise that Colombo designed them into the early Ferrari Grand Prix engine.



#5 GreenMachine

GreenMachine
  • Member

  • 3,109 posts
  • Joined: March 04

Posted 23 August 2025 - 21:42

Perhaps a clue is in the date?  :wave:



#6 MichaelHickey

MichaelHickey
  • Member

  • 7,051 posts
  • Joined: July 01

Posted 24 August 2025 - 19:42

The value of siamesed inlet ports is packaging. Once you draw the cylinder, add the locations of the cylinder head studs, the spark plug, the water galleries, the pushrods, and then find room for an inlet and an exhaust port. It's all getting rather tight, especially on small bore engines. 



#7 Lee Nicolle

Lee Nicolle
  • Member

  • 11,330 posts
  • Joined: July 08

Posted 01 December 2025 - 05:17

Siamesed intakes were cost saving and nothing more. Many worked quite well and really did not hurt performancemuch.

Port dividers generallymade little more power and at times lost some though generally helped bottom end mid range power.



#8 Magoo

Magoo
  • Member

  • 3,874 posts
  • Joined: October 10

Posted 17 December 2025 - 13:11

The politically correct term is conjoined, and yes, it's mainly about packaging and ease of manufacturing. 



#9 Magoo

Magoo
  • Member

  • 3,874 posts
  • Joined: October 10

Posted 17 December 2025 - 13:35

Until after World War II, conjoined intake and/or exhaust ports were the rule rather than the exception on volume production cars in the USA. 

 

The Ford flathead V8, for example. Three exhaust ports on each bank. Or the Buick straight eight cylinder head, with four intake ports. 

 

The actual argument is whether to join the passages in the manifold or inside the block or head. 



#10 PJGD

PJGD
  • Member

  • 164 posts
  • Joined: April 04

Posted 17 June 2026 - 22:23

Jowett%20Cylinder%20Head%20Section_Color

Here is a portion of the original factory drawing showing a section through the cylinder head of the Jowett Javelin and Jupiter 1.5L flat four engine.  This was designed by Gerald Palmer in the late 1940's but with combustion chamber input from Harry Weslake (see Weslake patent GB637209 filed in 1947).  Note that this illustrates a Siamesed inlet port, which due to the approach angle of the port to the valve means that the mixture will swirl in opposite directions in the paired cylinders.  In this particular application, a Siamesed port was selected as a matter of convenience as there was limited room to fit the spark plug tunnels and the four pushrod tunnels plus the Ø32 mm inlet tract along the upper face of the head; there was certainly not room for two separate ports.  Because in this application the firing order is such that the two cylinders of each head fire one immediately after the other, meaning that the inducted mixture of the first to fire is probably slightly lean while the following cylinder will be slightly rich.  

 

Nevertheless, although designed for a post war saloon car (the Javelin), when subsequently adapted for the Jupiter sports car the engine performed well enough in various races of the era including winning the 1.5L category at Le Mans in a 3-year hat trick (1950, 51, & 52).