Jump to content


Photo

Kork Ballington on a 250cc Konig?


  • Please log in to reply
7 replies to this topic

#1 brands77

brands77
  • Member

  • 191 posts
  • Joined: December 21

Posted 18 October 2025 - 14:38

The results for the 1973 250cc Austrian GP listed in my copy of Volker Rauch's book show a K Balangton from South Africa finishing in 17th place riding a Konig.

I have 2 questions about this result.

1. Is this actually Kork Ballington?

Most sources have Kork making his GP debut in 1976, but he was in Europe in 1973. However, there are no other records of a K Ballington or a K Balangton from South Africa finishing a GP in 1973 (and 74 or 75 for that matter). I can find no record of a South African rider with the surname Balangton. If it is Kork would this have been his actual GP debut? Austria was the second GP of the 1973 season.

2. Was the rider actually riding a 250cc Konig?

Again I can find no record of a 250cc Konig finishing a GP in 72, 73, 74 or 75. I can find no trace of a 250cc Konig engined bike on the Internet either. I know Konig made 350cc, 500cc and 680cc engines, during this period, which were used in bikes, but these I think were all flat 4s. I can't find anything to show they made a 250cc engine around then. I have seen pictures of a 250cc engine from 1967, but this is a flat 4 and so would have been ineligible to race in GPs in 1973. I can also find mentions of a 250cc Konig engine that was used in boats, karts and snow mobiles, and although this was a twin, it appears to be an engine made in the 1950s, so I think it may have been a bit old to be competitive in GPs in 1973.

Can anyone shed light on this result?


Edited by brands77, 18 October 2025 - 14:39.


Advertisement

#2 philippe7

philippe7
  • Member

  • 2,891 posts
  • Joined: August 03

Posted 19 October 2025 - 07:31

Kork Ballington did appear in a few Grand Prix in 1973 - most notably so at the season starting French GP at Paul Ricard where he qualified 27th in the 500cc class aboard his H1R (out of 52 entered - and 38 qualifiers ) . I do have him finishing 17th in the 250 class in Austria two weeks later but the "König" is definitely a mistake and I fully agree with your conclusions on this matter.

 

In 1973 , I also have Kork entered at the Finland Grand Prix, in 250 (Yamaha) and 500 (Kawasaki) but no trace of him in the results so not sure he was there after all. 

 

PS 1 : Incidentally the Salzburg organisers are notorious for making famous mistakes of this guise, for instance Anton Mang's first GP points during the 1975 350cc race are always documented as aboard an SMZ whereas all photos show that he was riding a Yamaha.  And there never was a "real" 350 SMZ anyway ( but in that case, maybe Mang used the acronym "Schögl Mang Zender" to personalize the brand of his Yamaha on the entry form  ...)  

 

PS 2 : just in case you are not aware ..... the most complete and up-to-date data of world championship results on the internet nowadays  is the site run by Sidonie, a french lady (!) whose homepage is here : 

 

https://programmesgp.../blog-post.html

 

And as an example the downloadable PDF page for the 1973 season is : 

 

https://drive.google...9uMK5Dw-An/view



#3 LittleChris

LittleChris
  • Member

  • 4,612 posts
  • Joined: April 01

Posted 19 October 2025 - 09:29

According to his autobiography ( Ballington Unkorked) he raced a Yamaha TD2B in the Austrian GP at Salzburg finishing 23rd. Seems to have been his only 250 GP that year though he raced in the 500 class there and at the French GP both DNF on a Seeley Kawasaki H1R

#4 brands77

brands77
  • Member

  • 191 posts
  • Joined: December 21

Posted 21 October 2025 - 09:52

Philippe7, thanks for the tip on the Sidonie site, it is great source of information and I had been completely unaware of it. LittleChris I haven't got Kork's book and I had hoped there might be something about it in there. Thank you for looking this up and sorting it out.

I agree with the mistakes, I can see in Rauch that Klaus Leonardt is down as riding a Jamsel machine, Sidonie's programme has it as a Yamaha, but I am pretty sure these would be Yamsel as Marcel Ancone is listed in the 350cc race as also riding a Jamsel and, from other sources, he rode a Yamsel that year.

On the same note, Eric Offenstadt, is listed in the 500c as riding a Kawasaki in the French GP, an SHF (Rauch)/Kawasaki (Sidonie)  in the West German GP, a Kawasaki (Rauch)/SMAC (Sidonie), at the Dutch a Kawasaki in the Czech and Kawasaki (Rauch)/SMAC (Sidonie) in Finland. I presume these these all the same bike and that SHF is again a mistake. If so what is the correct name for the bike - SMAC Kawasaki?



#5 philippe7

philippe7
  • Member

  • 2,891 posts
  • Joined: August 03

Posted 21 October 2025 - 14:34

brands77, regarding Eric Offenstadt :

 

1/ he is also listed by Sidonie as riding an SHF in Germany, but that is in the 250cc class.  "SHF" (for Small Hell Fire) if the name mechanic Philippe Berthelin used for his home-brewed specials, but in that case it is really only a nickname (for lack of a better word) as the bike is basically a Yamaha. Rauch probably made a mixup between his 250 and 500 sheets if he listed the SHF in the 500 class ...

 

2/ on the other hand, in the 500cc class, and during all of the 1973 season, Offenstadt used his self built special twin, which he called the SMAC ( which is the commercial name of his business : bike shop, mag wheels construction...) . The engine was basically a 750 H2 Kawasaki triple from which he chopped a cylinder off !  And installed in his usual self built monocoque chassis, similar to the one he had used with an H1R triple engine in 71 and 72.  So yes, most of the engine bits are of Kawasaki origin, but considering the extensive modification , and the special frame, it would be right to call the machine a "SMAC" in my opinion.



#6 brands77

brands77
  • Member

  • 191 posts
  • Joined: December 21

Posted 21 October 2025 - 17:14

Philippe7, you are correct as is Rauch! Eric Offenstadt is down as riding the SHF in the 250cc race, not the 500cc.

Please excuse all the questions, the period before 1975 is just before I started following racing, the brilliant Motor Cycle News special review of 1975 season, with all of the colour photos and results, is what got me hooked and I have been hooked every since. Some of the riders and machines of the early 1970s are new to me and the forum is such a great source of knowledge.

It is the variety of machinery used in the 1970s and 1980s that really interests me, then someone could build their own bike and win - even in the 500c class as Kim Newcombe and Jack Findlay showed. Into the 1980s small independent frame builders could win GPs, such as Antonio Cobas and Nico Bakker, and Ron Williams designed a frame for the NR500 Honda. I miss this in the current GP bikes, especially Moto2, which at one stage looked as if it would a single bike series.

What was the first monocoque chassis bike, was it the Ossa? Who then took the idea on and developed it from there. Was it Eric Offendstadt and Peter Williams or were there others who played a significant role?



#7 philippe7

philippe7
  • Member

  • 2,891 posts
  • Joined: August 03

Posted 23 October 2025 - 16:41


What was the first monocoque chassis bike, was it the Ossa? Who then took the idea on and developed it from there. Was it Eric Offendstadt and Peter Williams or were there others who played a significant role?

 

 

 

I have found it extremely risky to claim that "the first ever" ( in many fields, but of course in racing motorcycles ) was this or that, at this or that time ....inevitably, someone will pull out on obscure german or italian  (for instance) manufacturer who back in the 50's made something resembling a monocoque, a rising rate suspension, a telescopic fork or whatever ....

 

But if we stick to "modern" times (say, post 1968) then I agree that Herrero's Ossa was probably the first "monocoque" (ie, with fuel carried inside the chassis ) and Eric Offenstadt in 1970 probably the second. There was also a Seeley monocoque with a 500TR Suzuki twin seen around 1973, Rudi Kurth built his low-boy 500 Crescent on a monocoque, and at the same time frenchman Bernard Droulhiole also built a neat monocoque which was used on a few occasions by the Yamaha Sonauto team, for Patrick Pons or Christian Bourgeois, in 1974. But later, the "monocoque" definition became hazier as some frame makers started building "beam" frames ( hope that makes sense ) , Offenstadt in particular , while still building real monocoques on the side.  A good example of confusion would be the 500 KR Kawasaki that Kork Ballington used during 3 years (I think) in the early 80's = the first version was a real fuel carrying monocoque, but the second one was in fact a "beam" on top of which the fuel tank was added - and they used the same square 4 engine, and from the outside looked quite similar....



#8 kevins

kevins
  • Member

  • 164 posts
  • Joined: August 10

Posted 24 October 2025 - 07:46

Here's Kork showing the chassis of his '82 500 and he discusses what Philippe says about the tank.

 

https://www.youtube.com/watch?v=ojeq3iu4HrY