Jump to content


Photo

Tyrrell P34 - Can you help answer two questions? 1) "mystery part" and 2) gear changes


  • Please log in to reply
4 replies to this topic

#1 addled

addled
  • Member

  • 43 posts
  • Joined: November 14

Posted 19 January 2026 - 19:00

Hi,

 

This year marks half a century since the P34 six wheeler raced - difficult to believe!  I'm working on a detailed 1/12 scale model based on the Tamiya kit and, for now, looking for two bits of information.

 

1) Identifying the partly obscured 'mystery part' in this picture with cooling fins.  On the P34 it is located just ahead of the left front front wheel.  If you can, could you give me an idea of how it is/was wired?  In the picture, It appears to have a 'bare wire' attached.

 

https://cdn01.hobbyp...ost.com?qf14k2a

 

 

2) I’d also like to know how the gear lever functioned.  It looks as though it is simply a linear - back and forth -  motion.  I assumed all gear levers of this era worked through a gate of some sort

 

https://cdn01.hobbyp...ost.com?i65mglm

 

https://cdn01.hobbyp...ost.com?tweocmx

 

 

Thank you,

 

Mark


Edited by addled, 19 January 2026 - 19:06.


Advertisement

#2 10kDA

10kDA
  • Member

  • 1,895 posts
  • Joined: July 09

Posted 19 January 2026 - 23:52

Shifters like that typically operate as a tube (or rod)-within-a-tube, and the lever slid the inner tube forward and back. The entire tube also rotates around the tube's axis and something on the gearbox end rotated as well, to select gears. The motion of the shifter handle would be pretty much like a gated  shifter, with motion forward & back, right & left (rotation), but the  shaft for the handle is so short (as seen in the pics) a gate would get in the way.

 

I'll take a WAG at the mystery part. I can't think of any electrical component on a car of that era that would require that much heat sinking other than a transistor ignition. Just a guess though.



#3 addled

addled
  • Member

  • 43 posts
  • Joined: November 14

Posted 21 January 2026 - 14:37

Thank you 10k... I imagined (very vaguely) something like you've described for shifting. I'll see if I can find more in support of your transistor ignition theory, which seems logical.  I believed that, on cars using the DFV, all the ignition components were in the 'spark box,' attached between intake stacks.  But now that I think about it, on the P34, components like the solenoid, which was usually(?) 'at the back' were moved to the compartment ahead of the pedals.  Regards, Mark



#4 69seven

69seven
  • Member

  • 45 posts
  • Joined: February 20

Posted 27 January 2026 - 14:39

Mark,

 

It's possible that Tyrrell were trying a different ignition system to the Lucas Opus, from https://www.motorspo...e-trend-design/

 

"A similar CD system has been developed over the last few years by Walter Scherhag, a German electronics engineer with a factory near Frankfurt. His firm is called Contactless Ignition and his first experiments with the Cosworth DFV were with Team Tyrrell in the days of the Project 34 six-wheeler."



#5 addled

addled
  • Member

  • 43 posts
  • Joined: November 14

Posted 04 March 2026 - 10:29

Thanks very much for this information. It resolves another puzzle.  I've looked up Scherag but couldn't find additional references to him, biographic or otherwise, or to the firm on the web.  It may be that your info is confirmed(!) by a photo I've just posted to 'Historical research' of the side radiators/coolers on the P34.  The picture includes the spark box and apart from the lead from the coil, there is no wiring that you'd expect to see on DFV engine from connectors on the right of the coil.  It's possible (likely??? ) that these were unplugged to work on the box. Later versions in historic car races seem to have reverted to standard electricals or the CD version of Lucas (think this one was on the car sold by Sothebys from Jackie Scheckter's collection), though I can't say I've studied these to make comparisons. :stoned: