Jump to content


Photo

Ex-works machines


  • Please log in to reply
3 replies to this topic

#1 brands77

brands77
  • Member

  • 191 posts
  • Joined: December 21

Posted 27 January 2026 - 15:33

I read recently that Kel Carruthers' campaigned a Gates Honda 125cc which was an ex-works machine, although I have also heard that it was a Drixton Honda, which seems to contradict this, unless it was an ex-works engine in a Drixton frame.

In the 70s I remember reading that Jonny Cecotto had an ex Agostini 350 when he first came over in 1975 and the Sonauto team I think used ex works machines in the early 80s, I have seen it reported that Rapicault had a ex works 250. Also some of the Kawasaki 250/350s being campaigned may have been ex-works machines.

I had always thought that the Japanese manufactures kept very tight control of their works machines. Certainly, the works machines from the 80s onwards are reported to have gone to the crusher or back to Japan for all of the factories and Honda in particular, I thought kept very tight control of all of their machines.

So is it correct that the Gates Honda was an ex-works machine or engine and were there other ex works machines being campaigned by riders in the 60s, 70s or 80s.



Advertisement

#2 kevins

kevins
  • Member

  • 164 posts
  • Joined: August 10

Posted 29 January 2026 - 13:54

No idea about the Gates Honda, but Barry Sheene started his GP career on an ex works 125 Suzuki. From Wikipedia (but I've read it many times including his autobiography):

 

In 1970, Sheene and his father borrowed £2,000 (£36,720 in 2023), to purchase a twin-cylinder 125cc Suzuki RT67, a former factory racing team motorcycle campaigned by Stuart Graham in the 1968 World Championships and in selected 1969 events.[3][16] Although it was an expensive purchase, the ex-factory race bike helped to launch Sheene's international racing career.



#3 Michael Ferner

Michael Ferner
  • Member

  • 7,569 posts
  • Joined: November 09

Posted 29 January 2026 - 14:59

There were several former works Suzukis (besides the Graham/Sheene model) around at the time, I think Dieter Braun and Cees van Dongen also raced (ex-Anscheidt) machines, and there was one in Italy which became (or merely inspired?) the Malanca. Not sure about Honda, but Hailwood and Bryans were given '67 models to compete in non-championship races in '68 and '69, whatever became of them? Didn't Taveri also have one or two of his works bikes after retirement? As for Cecotto, I believe it was being said at the time that he and Takai had 'semi-works' bikes, they were certainly very special machines the way they played with the opposition at Le Castellet that day! The Dave Simmonds Kawasaki was an ex-works machine, too, and I think I recall that Toni Mang paid for his machines, modified them along with Sepp Schlögl and never returned them, so not everything was crushed.



#4 serafini

serafini
  • Member

  • 83 posts
  • Joined: October 09

Posted 19 March 2026 - 11:49

The Graham/Sheene 125 cc Suzuki went to Augusto Imperiali,a motorcycle dealer in Rome who also ran a private race team.

At the end of the 1973 season the bike was sold, or lent, to Jose Becocci, the founder and owner of Moto Bimm, near Florence.

Moto Bimm produced lightweight bikes, often with Minarelli engines.

Becocci hired Peter Durr to tune the bike and it was substantially revised, and re-named Suzuki-Bimm.

It was entrusted to Pier Paolo Bianchi for the 1974 Italian season. Bianchi worked in the Minarelli race shop at the time.

He won Italian title rounds at Modena and Misano and was runner up in the national 125 cc title..

His autobiography records that he rode the Suzuki-Bimm to third place in the Italian GP at Imola.

Reports of the GP indicate that his bike was a Minarelli. Are they mistaken or had the Suzuki-Bimm acquired a Minarelli engine as part of its upgrade?