Jump to content


Photo

Puzzled about Tyrrell P34 water and oil temp and pressure measuring


  • Please log in to reply
3 replies to this topic

#1 addled

addled
  • Member

  • 43 posts
  • Joined: November 14

Posted 04 March 2026 - 10:01

In the partial photo linked (Motor Sport online collection, British GP, July 76), I've circled some sensor connectors.  https://cdn01.hobbyp...ost.com?eulrobp

 

In foreground left, the water/fluid (just plain water?) temperature sensor. In the background there seem to be two tubes - attached both on the left and right - on each radiator. I think the one on top one is the water pressure tube.`

 

Apparently the McLaren M23 had two temp and pressure gauges, each monitoring 4 cylinders left and right. As far as I can see from instrument panel pics, the P34 arrangement was not the same.  One dual gauge was oil, the other water.

 

Here's where I'd appreciate some help:

 

1) If so, why have pressure tubes on both the left and right water radiators? And if there are pressure tubes left and right how was pressure measured?

2) If my info about the M23 is correct, with only two gauges how did McLaren handle oil temp and pressure?

3) Can anyone tell me where the oil temp and pressure sensors for P34 located on the oil coolers?  Oil temp possibly front end of oil cooler (away from viewer in this picture)

 

Thank you,

 

Mark


Edited by addled, 04 March 2026 - 10:04.


Advertisement

#2 MichaelHickey

MichaelHickey
  • Member

  • 7,051 posts
  • Joined: July 01

Posted 04 March 2026 - 22:28

Tubes from the top of the radiator might be bleeding tubes to the water pot where the radiator cap is located.



#3 69seven

69seven
  • Member

  • 45 posts
  • Joined: February 20

Posted 08 March 2026 - 11:18

Mark, the sensor in the left foreground looks like the typical Smiths Instruments type, similar to this - CA1310: Smiths Water Temperature and Oil Pressure Gauge - 52mm, 0-100psi and 30 to 110 degrees C - Smiths Classic Gauges - Gauges & Instruments - Vintage Car Parts .

 

There is a description of the P34 dashboard in the Sal Incandela book 'Anatomy and Development of the Formula One Racing Car from 1975' - The dashboard has two Snip pressure/temperature indicator instruments, one indicated the oil temperature and pressure, and the other fuel pressure and water temperature', although online images appear to show Smiths gauges. This would indicate that water pressure wasn't measured, so the tubes from the radiators are more likely to be bleed tubes. The photo below (hopefully) shows some Smiths gauges measuring oil temperature and pressure, and fuel pressure and water temperature, in a Repco Brabham, you can also see the capillary for the temperture gauge, and an Aeroquip line for the fuel pressure.

 

Regarding the McLaren M23, I doubt that the information regarding the  instruments (from Emerson Fittipaldi, McLaren and SMITHS - Caerbont Automotive Instruments | Manufacturers of Smiths Instruments ?)  is correct; the ex-Hunt car sold at Tom Hartley Jr. had the gauges labelled Oil and Water.

 

I would think oil pressure would be measured from the main oil gallery in the block, the oil in the oil coolers is heading back to the oil tank.

 

dash-0001.jpg


Edited by 69seven, 08 March 2026 - 16:00.


#4 Michael Ferner

Michael Ferner
  • Member

  • 7,559 posts
  • Joined: November 09

Posted 10 March 2026 - 07:53

That must be Senna's car, they clearly tampered with the steering wheel assembly.