Jump to content


Photo
- - - - -

F1 turbo lag.


  • Please log in to reply
15 replies to this topic

#1 Nathan

Nathan
  • Member

  • 10,703 posts
  • Joined: February 00

Posted 14 March 2026 - 10:13

I'm confused by this need to spool up the turbos for 5-10 seconds to get boost. Why?

 

I understand these are 1.6-litre, 6 cylinders making no more than 600hp.

 

20 years ago, backyard Honda tuners were using then 10-20 year old turbo technology to make their 1.6 liter 4 cylinders spit out 5-600hp, and when at the drag strip they didn't need to sit there spooling up for 5-10 seconds.


Edited by Nathan, 14 March 2026 - 14:28.


Advertisement

#2 Ross Stonefeld

Ross Stonefeld
  • Member

  • 71,182 posts
  • Joined: August 99

Posted 14 March 2026 - 13:35

Same. Lots of racecars have turbos and dont have anything like these lag problems. The turbo monsters of the 80s didn't take that long to spool up?

 

And if you need multiple seconds to build boost on the starting line, how does the turbo ever spool up once you're going? The turbo wouldn't kick in until you're nearly at the brake zone.



#3 Blue6ix

Blue6ix
  • Member

  • 457 posts
  • Joined: August 18

Posted 14 March 2026 - 17:10

Same. Lots of racecars have turbos and dont have anything like these lag problems. The turbo monsters of the 80s didn't take that long to spool up?

 

And if you need multiple seconds to build boost on the starting line, how does the turbo ever spool up once you're going? The turbo wouldn't kick in until you're nearly at the brake zone.

 

That depended of the engine generation model type when using them.

 

Of course earlier ones had quite bad one for them before eventually becoming better.

 

Though that went over for years, up to a certain point and up to for the years of 1979-1982 or maybe bit even for the beginning of 1983 season.

 

Though I'm speaking only for F1 turbos rather than any other like in USAC-PPG IndyCar back then.

 

Of course they were sometimes far too thirsty either for drivers or mechanics themselves to like it or had up to the year of 1984 quite bad transition problems when possibly wanting to gain any grip because of the power levels or torque what meant skidding or sliding back then.

 

Of course mainly for the starts only rather than otherwise, but there were differences when and if using either radials or cross-ply tyres.


Edited by Blue6ix, 14 March 2026 - 17:15.


#4 gruntguru

gruntguru
  • Member

  • 7,765 posts
  • Joined: January 09

Posted 16 March 2026 - 03:25

The ICE would be designed with the turbine sized to maintain the required MAP at the peak efficiency operating point with minimal wastegating. This ensures the highest peak efficiency and power (this is an efficiency formula) but unfortunately the large turbine and housing will not provide much boost at low loads and speeds.



#5 Nathan

Nathan
  • Member

  • 10,703 posts
  • Joined: February 00

Posted 16 March 2026 - 21:03

So we were drag racing all wrong... Thank you for that explanation

#6 MatsNorway

MatsNorway
  • Member

  • 2,867 posts
  • Joined: December 09

Posted 16 March 2026 - 23:39

The artificial fuel flow curve and strick engine map regulations ruins the fun as well. If fuel flow was flat and the strickt engine map where loosened up the engines whould have an easier time spooling up at the rpm needed for the launch. Same for bore and stroke ratios being locked or specced.

 

If you pick the wrong gear ratio and set the rpm there. you might have long spool time as you are close to the rpm where the turbo does not build boost at all. Too long gear and you risk spinning the wheels or bog down. Its tricky. Some of this can be solved with a good clutch but still tricky as its a manual release. 

 

Martin Schanche (most race wins in rallycross history and highest win rate) talked about it in great detail during the 80s or 90s when you had 4WD and horsepower was the only thing that mattered. He used actual F1 turboes in his RS200 etc. He seemed to set it up with the longest gear and just somehow slip the clutch just enough to get up to speed without bogging it down and then get a car length ahead. When he got it right. 

 

Todays strange F1 engine is a bastard between high revs and an actually efficent engine. It is trying to be two different things and sort of fail at both. It could be more efficient and cutting edge, and it sounds lame. Make it a 5 cyl and it would sound great while being more efficient. Give it a flat fuel flow, unlimited compression and it would sound awesome

 

 

With a flat fuel curve you get better sound, better drivability, better efficiency at WoT.  In many ways current ICE is the biggest issue with the new regs. Even bigger than energy harvesting. Harvesting and deployment is an easy fix for next year or even mid season. Just limit the output so you get more stable deployment and less deltas between cars if you care about that. I dont. Let them get the wild boost. 

 

I dont think the tricky launches are a issue either. If you think it is, let them run without KERS up to 150 instead of 50. Increases the time for the bogged car to get up to speed. And reduces the delta to it.


Edited by MatsNorway, 07 August 2026 - 07:09.


#7 ray b

ray b
  • Member

  • 3,007 posts
  • Joined: January 01

Posted 17 July 2026 - 18:32

last year they had an el motor in the turbo that adds mass = time to spin up muk or   j

but I thought they did that in with the new improved bs for 26 rules

 

so old info about last years cars

or some thing else ?


Edited by ray b, 17 July 2026 - 22:55.


#8 gruntguru

gruntguru
  • Member

  • 7,765 posts
  • Joined: January 09

Posted 21 July 2026 - 03:35

Thinking further on this subject, I believe the 6 seconds is the time it takes to achieve the boost level required for launch - all of this happening with the car stationary and the engine loaded only by the MGUK. 



#9 Ross Stonefeld

Ross Stonefeld
  • Member

  • 71,182 posts
  • Joined: August 99

Posted 21 July 2026 - 14:16

 I still don't understand where this excessive lag is coming from, or why it isn't a problem everytime the engine de-boosts. They do a lap to the grid but somehow can't maintain their boost, but going through a hairpin or doing a pitstop doesn't trigger the problem?



#10 gruntguru

gruntguru
  • Member

  • 7,765 posts
  • Joined: January 09

Posted 21 July 2026 - 21:44

The lag is far less than 6 seconds when the car is rolling and the engine can be fully loaded against the driveline. Whatever lag remains during race conditions (say half a second) can be fully compensated with electric power to the MGUK to compensate the reduced ICE output.



#11 7MGTEsup

7MGTEsup
  • Member

  • 3,147 posts
  • Joined: March 11

Posted 05 August 2026 - 08:29

 I still don't understand where this excessive lag is coming from, or why it isn't a problem everytime the engine de-boosts. They do a lap to the grid but somehow can't maintain their boost, but going through a hairpin or doing a pitstop doesn't trigger the problem?

 

Turbos require air flow to generate boost, you can free rev a turbo engine to redline and it will maybe generate 1-4psi of boost. To load up a turbo while stationary you need revs and load, so I assume they spin the engine and load it against the electric motor which will take a few seconds to reach launch boost. I'm assuming they put a pause before the lights due to the lights going out being a random amount of time so some times if the pause was really short you might catch some people without launch boost. This was a safety issue as you don't want a slow or stopped car when other cars are accelerating at a high rate and could be unsighted due to the nature of a standing start.



#12 7MGTEsup

7MGTEsup
  • Member

  • 3,147 posts
  • Joined: March 11

Posted 05 August 2026 - 08:34

last year they had an el motor in the turbo that adds mass = time to spin up muk or   j

but I thought they did that in with the new improved bs for 26 rules

 

so old info about last years cars

or some thing else ?

 

The MGUH was able to spin the turbo (it was a motor/generator) so turbo lag didn't exist last year. When the hybrid cars first arrived they were un wastegated as they used the MGUH to control compressor speed. This was why the early car were so quiet.


Edited by 7MGTEsup, 05 August 2026 - 08:34.


#13 MatsNorway

MatsNorway
  • Member

  • 2,867 posts
  • Joined: December 09

Posted 07 August 2026 - 07:23

 I still don't understand where this excessive lag is coming from, or why it isn't a problem everytime the engine de-boosts. They do a lap to the grid but somehow can't maintain their boost, but going through a hairpin or doing a pitstop doesn't trigger the problem?

 

  • They have too strict rules for engine maps. thats number 1. Its written in my previous post as well. With looser regs you would run Launch control, fat mixture with "bad" ignition timing at part throttle, this is no different than the ban on blown diffuser maps.
  • The turbo is as large as possible to have minimum back pressure and/or create as much boost as possible (currently boost limited) 
  • There is less compromise on the engine/turbo because the teams are running 8 speed gearboxes.
    • With a 7 speed you would have to think a little bit more about how long the gears should be and still be able to launch it from a stand still.
      • Most would probably still make first as long as they think they can get away with. And spin the tires instead.

Edited by MatsNorway, 07 August 2026 - 07:41.


#14 Ross Stonefeld

Ross Stonefeld
  • Member

  • 71,182 posts
  • Joined: August 99

Posted 07 August 2026 - 18:32

Forgive me for being the least educated person on this end of the forum, but I thought turbos are run off exhaust velocity which is a function of rpm with throttle opening? Hence my assumption revving it to the sky while standing still would boost it up. Where does engine 'load' contribute to the turbine spinning up?



#15 Greg Locock

Greg Locock
  • Member

  • 6,552 posts
  • Joined: March 03

Posted 07 August 2026 - 21:39

The volumetric flow rate of the exhaust is affected by its temperature, which is higher when the engine is doing something more useful than just going round. The mass flow rate is also higher at higher loads, for a given air fuel ratio (which is not constant for pure diesels). 



#16 MatsNorway

MatsNorway
  • Member

  • 2,867 posts
  • Joined: December 09

Posted 09 August 2026 - 19:40

For my first line in my previous post i guess i can say it in a different way:

 

You can run inefficient ignition timings to produce less crank horsepower but have the same gas output as the higher crank power engine map. You can ignite late or early. Both is probably banned in F1 on efficiency grounds and previous years due to blown diffuser. Ironically limiting the downforce off throttle even today on that blown monkey seat.

 

In theory you can run wide open throttle and balance the engine rpm with ignition only. With the perfect fuel, forever. (No sot or melting engine)

 

I guess im also describing how they do traction control by ignition cut. But even without ignition cut its should be possible. Difference between ignition cut and super late ignition is minimal. Early ignition however sounds like it could be a rough day for the rods.


Edited by MatsNorway, 09 August 2026 - 19:41.