Jump to content


Photo

Why did Climax quit F1 ?


  • Please log in to reply
9 replies to this topic

#1 Megatron

Megatron
  • Member

  • 3,688 posts
  • Joined: January 99

Posted 10 August 2001 - 12:38

A thread started on the Daily F1 fourm about them and I wondering why they quit F1? While their engines were still ran as late as 1969, they were pretty much KO'ed with the return of the 3.0 liter formula.

Why did they quit?

Advertisement

#2 fines

fines
  • Member

  • 9,647 posts
  • Joined: September 00

Posted 10 August 2001 - 13:00

Coventry Climax was taken over by Jaguar in 1965 (?), and they had another idea of what to do with an engineer like Wally Hassan!

#3 Don Capps

Don Capps
  • Member

  • 5,933 posts
  • Joined: May 99

Posted 10 August 2001 - 16:07

Coventry Climax was acquired by Jaguar in late 1963 and promptly announced that they were going to drop out of the GP engine business. However, Lyons was persuaded to stay the course and so they did until the end of the 1965 season. Except for a few special blocks used by Jim Clark until the Ford Cosworth deal came to fruition, that was it, the end of it for Climax.

They were having some serious cash flow problems and other difficulties as well. The "racing fire pumps" soon became something of a liability.

Basically, it was a business decision since they really weren't getting much back from the investment they were putting into the racing shop. Plus, the prospect of an expensive development program for the new GP formula coming into effect in 1966 didn't help matters, especially to the new owners who didn't have much of an interest in GP racing....

#4 leegle

leegle
  • Member

  • 499 posts
  • Joined: June 01

Posted 11 August 2001 - 01:45

During 1964 both Cooper and Brabham built chassis to suit the proposed new engine from Coventry Climax which was a flat 12 from memory. This is after the Jaguar buy-out apparently? :confused:
Clark used the stretched FWMV engine in the Tasman Series of 1966 and 1967 as well as some races during the 1966 World Championship.

#5 Don Capps

Don Capps
  • Member

  • 5,933 posts
  • Joined: May 99

Posted 11 August 2001 - 02:14

Lotus, Brabham & Cooper were prepared chassis to take the flat-16 from Coventry Climax. It was a project already in the hopper being developed when Jaguar bought the company. At one point it was hoped to be ready for 1964 (late), but then 1965 and then....

Climax did do a few tricks for the FWMV for Lotus to use in 1966 and then into early 1967. However, it was a stopgap effort at best.

#6 Roger Clark

Roger Clark
  • Member

  • 7,644 posts
  • Joined: February 00

Posted 11 August 2001 - 08:09

All three chassis built for the 16-cylinder Climax engine were put to good use. The Lotus 39 was fitted with an FPF and raced by Jim Clark in Australia and New Zealand. The Cooper was used as a testbed for the 3-litre Maserati engine, but the most successful of them all was the Brabham which became the BT19 and won the world Championship.

I think most of us would agree that the change to 3-litre engines in 1966 ws a Good Thing, but it is interesting to speculate on what might have happened if the 1.5-litre formula had continued for anothr year: the 16-cylinder Climax against the 12s from Ferrari and Honda. THen if the'd supercharged them a year later...

#7 Bayou Bengal

Bayou Bengal
  • Member

  • 134 posts
  • Joined: March 01

Posted 11 August 2001 - 16:57

I remember that Coventry-Climax announced that they wouldn't be making an engine for the new three liter formula. The 16 cylinder engine was from BRM (the H-16) and it was late arriving and won only one race (Jim Clark in the Lotus/BRM won the U.S.G.P. at Watkins Glen, New York in 1966). Lotus dumped the BRM for the new Ford-Cosworth next year.

#8 ray b

ray b
  • Member

  • 3,008 posts
  • Joined: January 01

Posted 12 August 2001 - 17:31

why no turbo's in 66 they had the 1.5 motors
and even G M had road cars with them
even at low bars better than 2.0 motor they tried
and what was the cc 3.0 v8 that showed up only once.

#9 karlcars

karlcars
  • Member

  • 670 posts
  • Joined: February 00

Posted 12 August 2001 - 18:15

Leonard Lee, the head of Climax, deserves huge credit for the effort his company made in Formulas 2 and 1 over quite some time, winning world championships and founding the British 'kit car' racing industry.

A major reason that Lee withdrew was that he felt Climax wasn't getting enough credit for its contribution. This was in the era before people realized that in order to get the credit you have to make some effort on the p.r. side, something that the laid-back Climax organization never did. Thus Climax itself was partly to blame for the lack of recognition that led to its withdrawal.

This snippet from my book on Classic Racing Engine (just out!) will be relevant:

Apart from BRM, in the 1950s only one British company had both high-performance engine ideas and the ability to execute them. This was Coventry Climax Engines Ltd., which could trace its origins to 1903. Climax made fork-lift trucks, fire pumps and the engines that powered them. Producing its own ultra-light four-cylinder engines for its portable fire pumps, it gave them the designation ‘FW’ for ‘featherweight’.

Climax’s chairman and managing director, the urbane Leonard P. Lee, turned out to be a closet racing enthusiast who also hired engineers with racing pedigrees, among them Wally Hassan and Harry Mundy. Thus when Kieft, Lotus and Cooper came along and said that they wanted 1,100 cc engines for their sports-racing cars, Lee gave his approval and from the single-overhead-cam fire-pump engine the FWA was produced, first racing in 1954.

Considerably to the surprise of Hassan and Mundy, at a Shell party at the Earl’s Court Motor Show of 1952 Leonard Lee gave them the green light to design a completely new engine for the coming 2½-litre Formula 1. Harry Mundy designed this, the FPE V8, in the evenings after finishing his Climax day job. By 1954 it was producing 264 bhp at 7,900 rpm on 60% methanol-based fuel. This was a very respectable output, as comparisons with other engines in this book will reveal. But Coventry-Climax decided not to produce and sell it for two reasons. One was that it believed that the FPE’s power did not compare well with outputs claimed for other Grand Prix engines in 1954. The other reason was that its potential customers were turning their attention instead to the new 1957 1½-litre Formula 2.

To make a four-cylinder engine for Lister, Cooper and Lotus, wrote Harry Mundy, ‘the cylinder head assembly, connecting rods and other components of the V8 were utilised.’ The ‘other components’ included much of the cam gear train. From the V8 with cylinder dimensions of 76 x 68 mm a 1½-litre four of 81.2 x 71.1 mm was evolved, the FPF Climax.

In 1958 Lotus and Cooper, at the urging of their drivers, began entering their Formula 2 cars in Formula 1 as well. For this Climax initially produced a two-litre FPF. So powered, with a paltry 176 horsepower, Coopers astonished the Grand Prix world by winning the first two races of 1958. A transitional 2.2-litre FPF was made and then, for the 1959 season, extensive redesign took the engine to a full 2.5 litres. Work began on 1 December 1958 and the engine first raced and won in March 1959. With the FPF Jack Brabham and the Cooper-Climax won the world championships of 1959 and 1960.

#10 Vitesse2

Vitesse2
  • Administrator

  • 46,282 posts
  • Joined: April 01

Posted 12 August 2001 - 21:05

The FPE engine did eventually race in Formula 1, albeit only once and very briefly.

Climax sold the few engines they had built to Paul Emery, who eventually found a use for them in 1966: enlarged to three litres and with Tecalemit fuel injection one allegedly produced 312bhp on the bench. One was fitted in the Shannon which Trevor Taylor drove in the 1966 British GP: it retired on lap one.